
Blog
Come and learn about the three transmission modes of screw air compressors 1. Transmission belt Engineers should always check the wear and tightness of the transmission belt. If the tightness is not adjusted properly, it will aggravate wear or breakage. When checking the tightness of the belt, you can press the middle part of the two pulleys with a force of 40N with your thumb. Generally, it is be...
Screw air compressors replace piston air compressors with many wearing parts and poor reliability, which is a trend in the air compressor market today. When using a screw air compressor, have you considered these four issues: the speed of the screw air compressor, the working temperature of the screw air compressor, the lubrication method of the screw air compressor, and the use environment of the...
Air compressors are prone to combustion and explosion accidents such as air storage tanks, air pipelines, cylinders, and fuselages. Cause Analysis: The supply of lubricating oil in the cylinder is too much, and the air containing a large amount of dust is sucked in the cylinder to form carbon deposits. Carbon deposits can block the piston ring in the ring groove, causing the valve to be unable to ...
The water-lubricated oil free screw compressor is lubricated with pure water that meets the drinking water standard, and there is no oil involved in the entire compression process. Therefore, 100% oil free clean compressed air is provided. Features: 1. High efficiency, high reliability, 100% pure oil free compressed air, ideal isothermal compression. 2. Technically superior electrical control syst...
According to the structure of the compressor, air compressor oil is divided into two types: reciprocating air compressor oil and rotary air compressor oil, each has three levels of light, medium and heavy load. Air compressor oil can be divided into mineral oil compressor oil and synthetic compressor oil according to the type of base oil. Air compressor oil is mainly used for the lubrication of th...
Many factories believe that the maintenance of screw air compressors is maintenance of 3 filters and 1 engine oil in 2000hrs. But this is only basic maintenance. In-depth maintenance is divided into 5 stages. If you can do a good job of deep maintenance. Then your air compressor can have a longer service life. Maintenance time and content of the air compressor. 1. Maintenance time and ...
Due to the lack of understanding of air compressors by some business managers, the continuous operation of the air compressor is based on the principle of keeping the equipment in good condition and not repaired, resulting in long equipment running time but lack of maintenance, and failures may occur at any time. 1. The subjective cause of the accident The management of the equipment supervisor is...
Recently, I have encountered the same problem as a customer inquiries: the safety valve of the air compressor frequently jumps and the oil is sprayed. I don't know where the problem is? Through many years of service experience, it is concluded that the main factors of the safety valve take-off failure of the screw air compressor are the following four aspects: 1. The large oil partial pressure dif...
The maintenance content of the pressure vessel in the air compressor system during the outage period is as follows: 1.Keep the pressure vessel dry and clean to prevent atmospheric corrosion. Scientific practice has proved that dry air generally does not corrode carbon steel and other ferroalloys. Corrosion starts only when there are dust, dirt or old corrosion products on the metal surface when we...
latest blog
© Copyright: 2022 Fuzhou Tuowei Mechanical & Electrical Equipment Co., Ltd. All Rights Reserved.
IPv6 network supported