banner
Products
Home

Screw Air Compressor

Industrial Screw Air Compressor Waste Heat Recovery Machine

Industrial Screw Air Compressor Waste Heat Recovery Machine

        The oil injected screw air compressor waste heat energy-saving water heater is an energy-saving hot water equipment that uses the high-temperature oil and gas heat of the air compressor to fully utilize the heat energy through the heat energy exchanger. It is controlled by heat exchange and power saving. Collect the heat energy generated by the air compressor during operation. While collecting the heat energy of the air compressor, it also effectively improves the operating conditions of the air compressor. It is an energy-saving equipment with high-efficiency waste heat recovery and utilization, no oil burning, no power consumption, energy saving, environmental protection and zero-cost operation.

  • Product Details

Working Principle:

       The air compressor waste heat energy-saving hot water unit uses the high-temperature oil and gas heat generated during the operation of the air compressor, and transfers the heat energy to the room temperature water through the heat exchanger to realize the collection and utilization of heat energy. As shown in the figure, the motor drives the screw to rotate and the air is sucked in through the filter. The high-pressure air is formed in the screw compressor and mixed with the circulating oil to form a high-temperature oil and gas mixture, which enters the oil and gas separator. The oil and gas mixture is divided into high-temperature oil and high-pressure gas. After the oil and gas separator is separated, it is condensed into a liquid state and then radiated by the cooler. The filter is filtered and returned to the compressor to complete a cycle process. In the energy-saving water heater unit, the heat exchanger fully recovers the high-temperature heat generated during the operation of the air compressor, and at the same time, it effectively reduces the operating temperature of the air compressor and improves the effective operation of the air compressor to increase the gas production.


Product Parameter:

Product number Suitable air compressor power Waste heat utilization Tubing diameter Outlet diameter Trachea diameter Outlet temperature Hot water production Applicable number
GD30A 22/30 17.6 DN15 DN25 DN40 55-85 0.35-0.2 300-350
GD30R 22/30 35.2 DN15 DN25 DN40 55-85 0.698-0.4 600-700
GD30RA 22/30 25.25 DN15 DN25 DN40 55-85 0.4-0.23 350-400
GD50A 37/50 29.6 DN15 DN25 DN50 55-85 0.58-0.33 480-550
GD50R 37/50 59.2 DN15 DN25 DN50 55-85 1.166-0.66 950-1000
GD50RA 37/50 42.9 DN15 DN25 DN50 55-85 0.68-0.38 580-600
GD60A 45/60 36 DN20 DN25 DN50 55-85 0.696-0.39 560-670
GD60R 45/60 72 DN20 DN25 DN50 55-85 1.39-0.79 1100-1350
GD60RA 45/60 52.2 DN20 DN25 DN50 55-85 0.8-0.45 640-790
GD75A 55/75 44 DN20 DN32 DN65 55-85 0.87-0.5 700-830
GD75R 55/75 88 DN20 DN32 DN65 55-85 1.74-1 1400-1670
GD75RA 55/75 51 DN20 DN32 DN65 55-85 1.01-0.58 810-970
GD100A 75/100 60 DN25 DN32 DN65 55-85 1.16-0.66 930-1100
GD100R 75/100 120 DN25 DN32 DN65 55-85 2.32-1.32 1860-2200


Application:


Company Information:





Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

related products
oxygen generator for hospital
Good Quality Medicinal Oxygen Generator Filling Machine 10 Years Use Life Hot Sale In India

The industrial oxygen generator is an automatic equipment that uses zeolite molecular sieve as the adsorbent and uses the principle of pressure adsorption and decompression desorption to adsorb and release oxygen from the air, thereby separating oxygen. Zeolite molecular sieve is a kind of spherical granular adsorbent with micropores on the surface and inside, which is processed by a special pore type treatment process, and it is white. Its pore type characteristics enable it to realize the kinetic separation of O2 and N2. Pressure swing adsorption oxygen production is based on the selective adsorption characteristics of zeolite molecular sieve. It adopts a cycle of pressure adsorption and decompression desorption to make compressed air alternately enter the adsorption tower to achieve air separation, thereby continuously producing high-purity product oxygen.

shotcrete machine for sale
High Output Concrete Spraying Machine Wet Shotcrete Robot for Tunnel Construction

TUC3016A/B mechanized concrete spraying manipulator is specially designed for spraying concrete projects under difficult construction conditions. Designed to automatically perform wet and dry sprayed concrete construction. This machine is very suitable for slope stabilization or mining and tunnel construction that require small manipulators. The wireless remote control can be used to provide complete mobility and improved safety by allowing the operator to stay away from newly excavated rocks and newly sprayed concrete.

Nitrogen Generator For Grain industry
Psa Nitrogen Generator For Chemical Industry

The PSA nitrogen production device uses compressed air as raw material, carbon molecular sieve as adsorbent, and uses pressure swing adsorption process to produce nitrogen. The PSA nitrogen generator uses the difference in the adsorption amount of oxygen and nitrogen in the air on the surface of the carbon molecular sieve and the diffusion rate of oxygen and nitrogen in the carbon molecular sieve. The opening and closing of the pneumatic valve is controlled by the programmable controller to achieve pressure adsorption. , The vacuum desorption process completes the separation of oxygen and nitrogen, and obtains the required purity nitrogen. The nitrogen purity is 98%-99.999%.

air compressor with tank
15kw 20hp Industrial Screw Air Compressor With Dryer And Air Tank

all in one ntegrates the main components of air compression systems such as screw compressors,dryers,precision filters.

kaeser air compressor
Similar to Kaeser Air Compressor 132kw 175hp Industrial Screw Air Compressor

     130kw 175hp Industrial Rotary Screw Air Compressor is Air Cooling Method Direct Drive.The motor directly drives the host through a maintenance-free coupling without transmission loss.

oxygen generator for hospital
Fast delivery 60m3/h PSA Oxygen Generator Oxigen Generator Oxygen Plant

PSA oxygen generator is an automated equipment that separates oxygen by adsorbing and releasing nitrogen from the air through the principle of pressure adsorption, desorption, and pressure reduction based on zeolite adsorbents. Suitable for hospitals, oxygen bottle flushing, etc.

Wet Shotcrete Robot
Wet Shotcrete Robot Concrete Shotcrete Pump Truck for Concrete Sprayer

TUC3016A/B mechanized concrete spraying manipulator is specially designed for spraying concrete projects under difficult construction conditions. Designed to automatically perform wet and dry sprayed concrete construction. This machine is very suitable for slope stabilization or mining and tunnel construction that require small manipulators. The wireless remote control can be used to provide complete mobility and improved safety by allowing the operator to stay away from newly excavated rocks and newly sprayed concrete.

psa medical oxygen plant
Medical Oxygen Producing Machine Psa Oxygen Generator Oxygen Plant

 Pressure swing adsorption oxygen production equipment it has the advantages of low equipment cost, small size, light weight, simple operation, convenient maintenance, low operating cost, fast on-site oxygen production, convenient switching, and pollution-free. It can be suitable for steel cutting, rich Oxygen-assisted combustion, hospital oxygen, etc. and cryogenic oxygen equipment high purity of oxygen, long service life of the equipment.

© Copyright: 2022 Fuzhou Tuowei Mechanical & Electrical Equipment Co., Ltd. All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.